This shaker takes 300mm or 450mm diameter sieves, stacking up to 7 sieves plus a pan or receiver in one run. It's built to be quiet in the lab, wit...

The QualiACE-T164 asphalt centrifuge extractor measures bitumen content in bituminous mixtures. It has a removable, precision-machined rotor bowl h...

The QualiCBR-A is an automatic CBR apparatus built for lab testing the strength of soil subgrades and base course materials with particle sizes und...

The Cygnus 2+ Mk5 has an end-mounted OLED display, which makes it well suited to hands-free work - rope access jobs in particular. Its twin-shot in...

The Cygnus 4 is a small, tough, and accurate ultrasonic thickness gauge. It's built for demanding conditions, with a simple keypad, intuitive menus...

The Cygnus 4+ Mk5 is a small, tough, and accurate ultrasonic thickness gauge, built for the harshest environments and toughest NDT jobs. It has a s...

The Cygnus 6+ PRO sits at the top of Cygnus Instruments' thickness gauge range. It pairs a large front colour LCD with an end-mounted OLED display ...

This twin-element ultrasonic probe is built for high-temperature, in-service thickness measurements and corrosion surveys across oil and gas, refin...

Single crystal probes work with Cygnus gauges in Multiple-Echo mode, letting you take measurements through coatings without stripping them first. W...

Twin crystal probes pair with Cygnus gauges in Echo-Echo or Single-Echo mode and are built for measuring on heavily corroded metal. All four models...

The Dynasonic Ultrasonic Hardness Tester UCI-4000 is a versatile portable hardness tester built around a dual testing method - combining ultrasonic...

This ergo splitter table is built specifically for use with Ergo containers, paired with a 50mm riffle box for fast, controlled sample splitting. L...

Field Inspection Vane Shear Tester - Includes Calibration Report Complete With Transit Case, T-Handle Apparatus, Small Vane (32mm x 16mm) Medium Va...

This is the larger version of the hand operated extruder, built with an extended ram stroke to handle U50 tubes as well as Mould A, Mould B, and CB...

This hand operated sample extruder has a 400mm ram stroke, enough to extrude Mould A, Mould B, and CBR samples. The heavy duty, double-speed hand p...

The Handy Magna MP-A2 is the newest addition to our handheld MPI yoke range - an AC hinged-leg magnetic yoke built to stay portable without giving ...

This is a full set of 12 steel abrasive charges for the AG-191 Los Angeles Abrasion Machine, weighing 5000g ± 25g as a set. It's the standard charg...

Used to measure the degradation of mineral aggregates of standard gradings resulting from a combination of actions including abrasion or attrition ...

The QualiCBR-M is a manual CBR apparatus built for lab testing the strength of soil subgrades and base course materials with particle sizes under 4...

This economy shaker is built for 200mm and 300mm diameter sieves, taking up to 10 x 200mm or 6 x 300mm sieves in one stack (with lid and receiver),...

The MTU-3 is a permanently magnetized steel reference disc with coarse and fine cracks induced into its surface, used to check the performance of m...

With 5Kgf HP-5K Manual Probe The UCI-4100DH is a versatile, portable hardness tester built around a dual testing approach - combining ultrasonic co...

The UCI-4100DM is a portable, motorized dual-mode hardness tester that combines ultrasonic contact impedance (UCI) and dynamic rebound (Leeb) in on...

The UCI-1100H is a portable ultrasonic durometer/hardness tester with its own manual probe. It uses the ultrasonic contact impedance method, making...

The QFD-200 Plus is a high-performance digital ultrasonic flaw detector built for precise detection of internal defects in welds, forgings, and com...